Installation

No tools or drilling. You need isopropyl alcohol and a clean cloth, a dry day above 50°F, and about 20 minutes of sun to flatten any shipping wrinkles.

1. Clean the door frame with isopropyl alcohol and let it dry.
2. Lay the two panels flat and smooth out any wrinkles in the edge binding.
3. Start with the bottom panel. Remove the Velcro strips one by one.
4. Peel the clear backing off the Velcro a little at a time, then align with the flat edges of the door next to the screening.
5. Work section by section until the Velcro is fully attached.
6. Press the bottom panel onto the Velcro, then repeat steps 3 to 6 for the top panel.